Common Mistakes in Physics
The physics mistakes students make most often are dropping units or mixing centimeters with meters, leaving forces off a free-body diagram, and thinking a bulb uses up current. Below are 27 common mistakes grouped by topic, each with how to fix it.
Units and Signs
Ignoring units entirely
Write the unit with every number you substitute and carry it through: 12 m ÷ 4 s = 3 m/s. A final answer without a unit is incomplete.
Mixing meters and centimeters
Convert to one unit before combining: 2 m + 50 cm = 2 m + 0.50 m = 2.50 m, not 52.
Forgetting unit conversion before calculation
Convert to SI units before substituting: 36 km/h = 10 m/s and 500 g = 0.500 kg. Plugging in 36 or 500 directly makes the answer wrong by a large factor.
Treating negative sign as error instead of direction
Choose a positive direction and keep it: if up is positive, a ball falling at 5 m/s has v = −5 m/s. The minus sign carries the direction, so do not drop it.
Cancelling units incorrectly
Treat units like algebra factors: (m/s) × s = m, but (m/s) ÷ s = m/s², not m. Cancel a unit only when it appears in both a numerator and a denominator.
Using formulas without checking dimensional consistency
Check that both sides have the same units before trusting a formula: in d = vt, (m/s) × s = m works, but d = v/t would give m/s², not m.
Free Body Diagrams
Missing forces acting on the object
Draw weight first, then one force for each thing touching the object. A box at rest on a ramp has three: weight, the normal force and friction up the slope.
Drawing forces that don't exist
Every force needs a source you can name, such as Earth, a surface or a rope. A ball in flight has no “force of the throw”, only weight and air resistance.
Combining forces from different objects
Draw only the forces acting on the chosen object. For a book on a table, include the table's push on the book, not the book's push on the table.
Confusing action-reaction pairs
Third-law pairs act on two different objects, so they never share a diagram. Weight and the normal force on a book are not a pair; Earth's pull on the book pairs with the book's pull on Earth.
Forgetting direction arrows
Forces are vectors, so draw each as an arrow from the object in the direction the force acts: weight straight down, the normal force perpendicular to the surface, friction along it.
Treating forces as motion
Forces are pushes and pulls, not motion. A puck gliding at constant speed on frictionless ice needs no forward force; only weight and the normal force act, and they balance.
Electric Current
Thinking current gets 'used up' in a bulb or resistor
Current is a rate of charge flow. In a simple series path, the same current enters and leaves each component; what changes is the energy transferred per charge.
Confusing conventional current direction with electron flow
Conventional current is defined from positive to negative. Electrons drift the other way, but circuit calculations still use the conventional direction.
Using milliamps in formulas without converting to amps
Convert before substituting. For example, 250 mA = 0.250 A, not 250 A.
Mixing up current and voltage
Current is charge flow per second. Voltage is energy transferred per coulomb. One tells you how much flows; the other tells you how hard it is pushed.
Forgetting that I = Q/t is about total charge over time
If the problem gives charge and time, current comes from dividing charge by time. If it gives current and time, rearrange to Q = It.
Wave Speed
Thinking a higher frequency makes a wave move faster in the same medium
In one medium, the wave speed stays fixed. Changing the frequency changes the wavelength instead.
Confusing wave speed with the speed of particles in the medium
Wave speed is how fast the pattern moves. The particles of the medium usually just oscillate around equilibrium.
Using the wrong relationship, like v = f/λ
The wave equation multiplies frequency by wavelength: v = fλ. Dividing gives the wrong units and the wrong answer.
Mixing centimetres and metres without converting
Keep SI units consistent. If speed is in m/s, wavelength should be in metres and frequency in hertz.
Forgetting to convert period into frequency first
If the problem gives period T, calculate frequency with f = 1/T before using v = fλ.
Coulomb's Law
Forgetting the inverse-square dependence on distance
Distance is squared in the denominator. If the separation doubles, the force becomes one quarter as large.
Using microcoulombs or nanocoulombs without converting to coulombs
Convert before substituting. For example, 2 μC = 2 × 10^-6 C.
Using surface-to-surface distance instead of center-to-center distance
For point charges and uniformly charged spheres, Coulomb’s law uses the distance between charge centres.
Ignoring the signs of the charges when deciding attraction or repulsion
Use magnitudes for the size of the force, then use the charge signs to determine direction: like repels, unlike attracts.
Mixing up Coulomb’s law with the electric field formula
Force between two charges uses F = kq1q2/r^2. Electric field from one charge uses E = kQ/r^2.
Mistakes From Every Lesson, by Topic
Every physics lesson lists the mistakes students make with that idea. These pages collect them by topic, each linked to the lesson that explains the right idea.
- Electricity & Circuits (44 mistakes)
- Energy Systems (72 mistakes)
- Fields & Magnetism (48 mistakes)
- Fluids & Thermodynamics (28 mistakes)
- Forces & Interactions (116 mistakes)
- Gravitation & Orbits (12 mistakes)
- Modern Physics (20 mistakes)
- Motion & Change (56 mistakes)
- Optics & Light (36 mistakes)
- Waves & Information (96 mistakes)
Why These Mistakes Happen
Physics misconceptions often come from everyday experience. It feels natural to think heavier objects fall faster, that motion needs a continuous force, or that energy gets "used up" in a literal sense. Each fix below replaces the intuition with the physical model, the units, and the cause and effect that actually hold.