Common Mistakes in Motion & Change

56 common pitfalls across 14 concepts, including 14 recurring stuck points

These are the pitfalls students hit across all 14 motion & change concepts, from Position, Displacement and Velocity onward. Each entry names the concept it comes from, so you can tell a slip from a genuine gap and go straight to the explanation.

1
Position
Stuck Point

Students often know a formula related to position but skip the recognition step: Does the question ask where the object is at one moment, measured from a stated origin and positive direction? That leads to a correct-looking substitution attached to the wrong physical model.

2
Position
Mistake

Treating position as absolute — position is always relative to a chosen reference point; different origins give different position values for the same object.

3
Position
Mistake

Confusing position with distance — position includes direction and can be negative, while distance is always positive.

4
Position
Mistake

Forgetting to define the reference point and positive direction before solving — this leads to sign errors and inconsistent answers.

5
Displacement
Stuck Point

Students often know a formula related to displacement but skip the recognition step: Does only the start and end point matter, with a direction, rather than the length of the path? That leads to a correct-looking substitution attached to the wrong physical model.

6
Displacement
Mistake

Using total distance travelled instead of the straight-line change in position — a round trip of 10 km has zero displacement but 10 km of distance.

7
Displacement
Mistake

Forgetting that displacement is a vector — stating '5 metres' without a direction is incomplete; the answer should be '5 metres northeast' or similar.

8
Displacement
Mistake

Adding displacements as scalars instead of using vector addition — when directions differ, you must add components, not magnitudes.

9
Velocity
Stuck Point

Students often know a formula related to velocity but skip the recognition step: Do you need how fast the position changes and which way, so that motion in opposite directions gets opposite signs? That leads to a correct-looking substitution attached to the wrong physical model.

10
Velocity
Mistake

Using total distance instead of displacement — a round trip of 10 km out and back has zero average velocity but 20 km of distance.

11
Velocity
Mistake

Dropping the direction and treating velocity as if it were speed — velocity is a vector quantity.

12
Velocity
Mistake

Confusing instantaneous velocity with average velocity — average velocity uses total displacement over total time, while instantaneous is the velocity at one specific moment.

13
Speed
Stuck Point

Students often know a formula related to speed but skip the recognition step: Do you only need how fast something moves, with its direction making no difference to the answer? That leads to a correct-looking substitution attached to the wrong physical model.

14
Speed
Mistake

Confusing speed with velocity — speed is a scalar (no direction), while velocity is a vector (includes direction).

15
Speed
Mistake

Using displacement instead of total distance when calculating average speed — a round trip has nonzero average speed but zero average velocity.

16
Speed
Mistake

Averaging speeds incorrectly — if you travel half the distance at 40 km/h and half at 60 km/h, the average speed is not 50 km/h but the harmonic mean.

17
Acceleration
Stuck Point

Students often know a formula related to acceleration but skip the recognition step: Is the velocity changing, in size or in direction, and do you need how quickly it changes? That leads to a correct-looking substitution attached to the wrong physical model.

18
Acceleration
Mistake

Thinking negative acceleration always means slowing down — if the object is moving in the negative direction, negative acceleration actually speeds it up.

19
Acceleration
Mistake

Confusing acceleration with velocity — an object can have high velocity but zero acceleration (constant speed in a straight line), or zero velocity but nonzero acceleration (a ball at the top of its arc).

20
Acceleration
Mistake

Forgetting that acceleration is a vector — in circular motion, there is centripetal acceleration even at constant speed because the direction changes.

21
Free Fall
Stuck Point

Students often know a formula related to free fall but skip the recognition step: Is gravity the only force that matters, and is the object moving only straight up or straight down? That leads to a correct-looking substitution attached to the wrong physical model.

22
Free Fall
Mistake

Thinking heavier objects fall faster — in the absence of air resistance, all objects fall at the same rate; a feather and a hammer dropped on the Moon land together.

23
Free Fall
Mistake

Forgetting that an object thrown upward is still in free fall the entire time — gravity acts on it continuously, including at the very top where its velocity is momentarily zero.

24
Free Fall
Mistake

Using the wrong sign for g — if you define 'up' as positive, then g should be negative (−9.8 m/s²); mixing up signs is the most common source of errors.

25
Projectile Motion
Stuck Point

Students often know a formula related to projectile motion but skip the recognition step: After launch, is the object moving sideways and vertically at the same time, with only gravity acting on it? That leads to a correct-looking substitution attached to the wrong physical model.

26

Applying acceleration in the horizontal direction — there is no horizontal acceleration in ideal projectile motion (air resistance is neglected), so horizontal velocity is constant.

27

Using the full initial speed instead of its components — you must resolve v0 into v0x=v0cos⁡θ and v0y=v0sin⁡θ before applying kinematic equations.

28

Forgetting that at the highest point the vertical velocity is zero but the horizontal velocity is not — the projectile does not stop at the top, it only stops rising.

29
Circular Motion
Stuck Point

Students often know a formula related to circular motion but skip the recognition step: Is the object moving along a circle or a circular arc, so its direction keeps changing even at a steady speed? That leads to a correct-looking substitution attached to the wrong physical model.

30

Thinking that constant speed means zero acceleration — in circular motion, the direction is always changing, so there is always centripetal acceleration toward the centre.

31

Drawing the acceleration vector tangent to the circle instead of pointing toward the centre — centripetal acceleration is always radially inward.

32

Confusing period (T, time for one revolution) with frequency (f, revolutions per second) — they are reciprocals: T=1/f.

33
Reference Frame
Stuck Point

Students often know a formula related to reference frame but skip the recognition step: Do different observers describe the same motion differently here, so you must say whose viewpoint you are using? That leads to a correct-looking substitution attached to the wrong physical model.

34

Treating one reference frame as 'correct' and another as 'wrong' — all inertial frames are equally valid; physics works the same in each one.

35

Forgetting to specify the reference frame when stating a velocity — saying 'the car is going 60 km/h' is incomplete without stating relative to what (the road, another car, etc.).

36

Mixing quantities measured in different reference frames in the same equation — all velocities and positions in a calculation must refer to the same frame.

37
Vectors
Stuck Point

Students often know a formula related to vectors but skip the recognition step: Do you have to combine or split quantities whose directions affect the result, such as two forces at an angle? That leads to a correct-looking substitution attached to the wrong physical model.

38
Vectors
Mistake

Adding vector magnitudes directly — two forces of 3 N and 4 N at right angles produce a resultant of 5 N (not 7 N); you must use vector addition.

39
Vectors
Mistake

Forgetting to include direction in the answer — '5 m/s' is a speed (scalar), while '5 m/s north' is a velocity (vector); the direction is essential.

40
Vectors
Mistake

Resolving components with the wrong trigonometric function — use cosine for the component adjacent to the angle and sine for the component opposite.

41
Angular Velocity
Stuck Point

Students often know a formula related to angular velocity but skip the recognition step: Do you need how fast something turns about an axis, as an angle per second, rather than metres per second along its path? That leads to a correct-looking substitution attached to the wrong physical model.

42

Using degrees instead of radians in formulas — all rotational physics equations require angles in radians (2π rad =360°).

43

Confusing angular velocity with linear (tangential) velocity — angular velocity is the same for all points on a rigid body, but linear velocity depends on the distance from the axis.

44

Forgetting the direction of angular velocity — by the right-hand rule, it points along the axis of rotation, not in the plane of rotation.

45
Average Speed
Stuck Point

Students often know a formula related to average speed but skip the recognition step: Do you want one speed for a whole trip, counting every stop, slow stretch and fast stretch along the way? That leads to a correct-looking substitution attached to the wrong physical model.

46

Using displacement instead of total distance.

47

Simply averaging two speed values without checking how much time was spent at each speed.

48

Leaving out the time spent stopped — average speed divides by the whole elapsed time, rests included: 30 km ridden in 1.5 hours plus a 30-minute rest averages 15 km/h (30 km over 2 h), not 20 km/h.

49

Students often know a formula related to instantaneous speed but skip the recognition step: Is the question how fast the object is moving at one particular instant, rather than across a whole stretch of time? That leads to a correct-looking substitution attached to the wrong physical model.

50

Confusing a single speedometer reading with average speed for the whole journey.

51

Using total distance over total time when the question asks for a speed at one instant.

52

Assuming an object moved at its average speed the whole time — an average of 50 km/h can include stops and stretches at 80 km/h, so the speed at any one instant can be well above or below the average.

53
Relative Velocity
Stuck Point

Students often know a formula related to relative velocity but skip the recognition step: Is a velocity known relative to one moving thing, such as water, air or a train, but needed relative to something else? That leads to a correct-looking substitution attached to the wrong physical model.

54

Mixing velocities measured in different frames without converting them.

55

Ignoring direction when combining velocities.

56

Taking the velocity of A relative to B to be the same as the velocity of B relative to A — they have equal size but opposite direction, v⃗B/A=−v⃗A/B: if a car moves 5 m/s east relative to you, you move 5 m/s west relative to the car.