Common Mistakes in Fields & Magnetism

48 common pitfalls across 12 concepts, including 12 recurring stuck points

These are the pitfalls students hit across all 12 fields & magnetism concepts, from Electric Field, Coulomb's Law and Electric Potential onward. Each entry names the concept it comes from, so you can tell a slip from a genuine gap and go straight to the explanation.

1
Electric Field
Stuck Point

Students often know a formula related to electric field but skip the recognition step: Does the question want the force per coulomb at a point near a source, whatever charge is later put there? That leads to a correct-looking substitution attached to the wrong physical model.

2

Confusing electric field with electric force — the field E=F/q exists at a point regardless of whether a test charge is present; force requires a charge to act on.

3

Forgetting that electric field is a vector: when multiple charges are present, you must add their fields using vector addition, not just add the magnitudes.

4

Using the wrong distance — r is the distance from the source charge to the field point, not between two source charges.

5
Coulomb's Law
Stuck Point

Students often know a formula related to coulomb's law but skip the recognition step: Are two point charges and their separation given, with the force between them asked for? That leads to a correct-looking substitution attached to the wrong physical model.

6

Forgetting the inverse-square dependence — halving the distance quadruples the force, not just doubles it.

7

Using the distance between the surfaces of two charged spheres instead of the distance between their centres — Coulomb's law uses centre-to-centre distance for point charges and uniform spheres.

8

Dropping the sign of the charges and getting the force direction wrong — like charges repel (positive force away) and unlike charges attract (force toward each other).

9
Electric Potential
Stuck Point

Students often know a formula related to electric potential but skip the recognition step: Is the answer an energy per coulomb, in volts, at one single point rather than between two points? That leads to a correct-looking substitution attached to the wrong physical model.

10

Confusing electric potential (scalar, at a single point) with potential difference (between two points) — potential alone does not tell you about energy transfer.

11

Using the electric field formula E=kQ/r2 when the potential formula V=kQ/r is needed — potential falls off as 1/r, not 1/r2.

12

Forgetting that potential is a scalar: contributions from multiple charges are added algebraically (with signs), not as vectors.

13

Students often know a formula related to potential difference but skip the recognition step: Is the answer the energy per coulomb gained or lost between two named points, such as across a component? That leads to a correct-looking substitution attached to the wrong physical model.

14

Confusing electric potential (at one point) with potential difference (between two points) — voltage is always a difference.

15

Forgetting that potential difference is measured in volts (joules per coulomb), not in joules alone.

16

Mixing up the sign convention: work done by the field on a positive charge moving from high to low potential is positive.

17
Magnetic Field
Stuck Point

Students often know a formula related to magnetic field but skip the recognition step: Is the question about which way a compass would point, and how strongly, at places near a magnet or a current? That leads to a correct-looking substitution attached to the wrong physical model.

18

Thinking magnetic fields only come from permanent magnets — any moving charge or current creates a magnetic field.

19

Drawing magnetic field lines that start or end in space — unlike electric field lines, magnetic field lines always form closed loops.

20

Confusing the direction of the magnetic field with the direction of the force on a charge — the force is perpendicular to both the velocity and the field (use the right-hand rule or cross product).

21
Magnetic Force
Stuck Point

Students often know a formula related to magnetic force but skip the recognition step: Is the answer the sideways push on one moving charge or one current-carrying wire in a magnetic field? That leads to a correct-looking substitution attached to the wrong physical model.

22

Using the wrong angle — θ is the angle between the velocity vector and the magnetic field, not between the force and the field.

23

Forgetting that the magnetic force is zero when the charge moves parallel to the field (sin⁡0°=0).

24

Applying the right-hand rule incorrectly for negative charges — the force direction reverses for electrons compared to positive charges.

25

Students often know a formula related to electromagnetic induction but skip the recognition step: Is the question whether a changing magnetic flux through a loop produces any voltage at all, not its size or direction? That leads to a correct-looking substitution attached to the wrong physical model.

26

Thinking a strong magnetic field alone is enough to induce current — induction requires a changing flux, not just a strong field; a stationary coil in a constant field produces zero EMF.

27

Confusing the magnetic field with the magnetic flux — flux is ΦB=BAcos⁡θ and includes both the field strength and the area and orientation of the loop.

28

Forgetting to consider all ways flux can change — the field magnitude, the loop area, or the angle between them can each change independently to produce an EMF.

29
Faraday's Law
Stuck Point

Students often know a formula related to faraday's law but skip the recognition step: Do you need the size of an induced voltage, from how fast the flux changes and how many turns there are? That leads to a correct-looking substitution attached to the wrong physical model.

30

Forgetting to multiply by the number of turns N — a coil with 100 turns produces 100 times more EMF than a single loop.

31

Ignoring the angle θ between the magnetic field and the area vector when computing flux (ΦB=BAcos⁡θ, not just BA).

32

Dropping the negative sign and then getting the direction of induced current wrong — the sign encodes Lenz's law.

33
Lenz's Law
Stuck Point

Students often know a formula related to lenz's law but skip the recognition step: Do you need the direction of an induced current, the pole a coil forms, or which way a magnet is pushed? That leads to a correct-looking substitution attached to the wrong physical model.

34
Lenz's Law
Mistake

Thinking the induced current opposes the magnetic field itself — it opposes the change in flux, not the existing field.

35
Lenz's Law
Mistake

Forgetting to use the right-hand rule to convert from 'opposing field direction' to 'induced current direction' — curling fingers in the current direction should give the opposing field along the thumb.

36
Lenz's Law
Mistake

Confusing Lenz's law (direction) with Faraday's law (magnitude) — Lenz's law tells you which way the current flows, not how much.

37
Generator
Stuck Point

Students often know a formula related to generator but skip the recognition step: Is something being spun to keep the flux through a coil changing, so that motion is turned into electrical energy? That leads to a correct-looking substitution attached to the wrong physical model.

38
Generator
Mistake

Thinking a generator creates energy from nothing — it converts mechanical energy into electrical energy; the energy comes from whatever spins the turbine (water, steam, wind).

39
Generator
Mistake

Confusing a generator with a battery — a battery uses chemical energy and produces DC; a generator uses mechanical rotation and naturally produces AC.

40
Generator
Mistake

Forgetting that the output is alternating current (AC) — the EMF oscillates sinusoidally because the flux change reverses direction every half-turn.

41
Transformer
Stuck Point

Students often know a formula related to transformer but skip the recognition step: Is an alternating voltage being changed to a new value by two coils sharing one iron core? That leads to a correct-looking substitution attached to the wrong physical model.

42
Transformer
Mistake

Trying to use a transformer with direct current (DC) — transformers only work with alternating current because they rely on a changing magnetic flux.

43
Transformer
Mistake

Forgetting that power is conserved: if the secondary voltage is higher, the secondary current must be lower, not the same.

44
Transformer
Mistake

Mixing up primary and secondary — the primary coil is connected to the input (source), the secondary to the output (load).

45
Electric Motor
Stuck Point

Students often know a formula related to electric motor but skip the recognition step: Is a supplied current making a coil keep turning in a magnetic field, so electrical energy becomes rotation? That leads to a correct-looking substitution attached to the wrong physical model.

46

Thinking the coil keeps spinning on its own once it reaches one half-turn — without a commutator to reverse the current direction, the coil would oscillate back and forth instead of rotating continuously.

47

Confusing the motor effect with electromagnetic induction — a motor converts electrical energy to mechanical energy using F=BIL; induction converts mechanical to electrical using a changing flux.

48

Forgetting that a running motor also acts as a generator (back-EMF) — the spinning coil induces a voltage that opposes the supply voltage, which is why motors draw more current at startup than at full speed.