Common Mistakes in Waves & Information

96 common pitfalls across 24 concepts, including 24 recurring stuck points

These are the pitfalls students hit across all 24 waves & information concepts, from Waves, Wavelength and Frequency onward. Each entry names the concept it comes from, so you can tell a slip from a genuine gap and go straight to the explanation.

1
Waves
Stuck Point

Students often know a formula related to waves but skip the recognition step: Does energy get from one place to another while the material it passes through stays put? That leads to a correct-looking substitution attached to the wrong physical model.

2
Waves
Mistake

Thinking waves carry matter from one place to another — waves transfer energy and information, not matter; the medium oscillates in place.

3
Waves
Mistake

Confusing wave speed with the speed of particles in the medium — wave speed is how fast the pattern moves, not how fast the individual particles oscillate.

4
Waves
Mistake

Assuming all waves need a medium — electromagnetic waves (light, radio) can travel through a vacuum, while mechanical waves (sound, water waves) require a medium.

5
Wavelength
Stuck Point

Students often know a formula related to wavelength but skip the recognition step: Is the question about the distance along the wave from one crest (or compression) to the next? That leads to a correct-looking substitution attached to the wrong physical model.

6
Wavelength
Mistake

Confusing wavelength with amplitude — wavelength is measured horizontally (peak to peak), while amplitude is measured vertically (equilibrium to peak).

7
Wavelength
Mistake

Measuring from peak to trough instead of peak to peak — that gives only half a wavelength.

8
Wavelength
Mistake

Forgetting to convert units: mixing centimetres for wavelength with metres per second for speed without converting.

9
Frequency
Stuck Point

Students often know a formula related to frequency but skip the recognition step: Is the question about how many complete cycles a source makes, or pass a point, each second? That leads to a correct-looking substitution attached to the wrong physical model.

10
Frequency
Mistake

Confusing frequency with period — frequency is cycles per second, period is seconds per cycle; they are reciprocals, not the same thing.

11
Frequency
Mistake

Forgetting to convert units: using milliseconds for period without converting to seconds before taking the reciprocal.

12
Frequency
Mistake

Thinking that higher frequency means faster wave speed — in a given medium, changing frequency changes wavelength, not speed.

13
Amplitude
Stuck Point

Students often know a formula related to amplitude but skip the recognition step: Is the question about how far the medium moves from its rest position at the biggest point of the swing? That leads to a correct-looking substitution attached to the wrong physical model.

14
Amplitude
Mistake

Measuring from trough to peak and calling it the amplitude — that is the full wave height, which equals twice the amplitude.

15
Amplitude
Mistake

Confusing amplitude with wavelength — amplitude is a vertical measurement (perpendicular to wave travel), while wavelength is horizontal (along the direction of travel).

16
Amplitude
Mistake

Assuming amplitude affects wave speed — amplitude determines energy and intensity, not the speed at which the wave propagates.

17
Wave Speed
Stuck Point

Students often know a formula related to wave speed but skip the recognition step: Is the unknown how many metres the wave pattern itself covers each second? That leads to a correct-looking substitution attached to the wrong physical model.

18
Wave Speed
Mistake

Confusing wave speed with the speed of the particles in the medium — wave speed is how fast the pattern moves, not how fast the medium oscillates.

19
Wave Speed
Mistake

Trying to change wave speed by changing frequency — in a given medium the speed is fixed; changing f changes λ instead.

20
Wave Speed
Mistake

Using inconsistent units: mixing cm for wavelength with m/s for speed without converting.

21
Transverse Wave
Stuck Point

Students often know a formula related to transverse wave but skip the recognition step: Does the medium move at right angles to the direction the wave travels? That leads to a correct-looking substitution attached to the wrong physical model.

22

Classifying sound as a transverse wave — sound is longitudinal because air molecules oscillate parallel to the direction of travel.

23

Thinking water waves are purely transverse — water surface particles actually move in circular or elliptical paths, combining transverse and longitudinal motion.

24

Confusing the direction of oscillation with the direction of energy transfer — in a transverse wave, energy travels along the wave but particles move perpendicular to it.

25
Longitudinal Wave
Stuck Point

Students often know a formula related to longitudinal wave but skip the recognition step: Does the medium move back and forth along the direction the wave travels? That leads to a correct-looking substitution attached to the wrong physical model.

26

Drawing longitudinal waves with crests and troughs like transverse waves — longitudinal waves have compressions and rarefactions, not peaks and valleys.

27

Thinking longitudinal waves can be polarised — polarisation requires oscillation perpendicular to travel, which longitudinal waves lack.

28

Believing longitudinal waves only travel through gases — they also travel through liquids and solids; in fact, sound travels faster in solids.

29
Sound
Stuck Point

Students often know a formula related to sound but skip the recognition step: Is it a vibration passed from particle to particle through air, water or a solid, the kind ears and microphones detect? That leads to a correct-looking substitution attached to the wrong physical model.

30
Sound
Mistake

Thinking sound can travel through a vacuum — sound is a mechanical wave and requires a medium; there is no sound in outer space.

31
Sound
Mistake

Assuming sound travels at the same speed in all media — sound is fastest in solids, slower in liquids, and slowest in gases.

32
Sound
Mistake

Confusing loudness with pitch — loudness depends on amplitude (how big the pressure swings are), while pitch depends on frequency (vibration rate).

33

Students often know a formula related to electromagnetic waves but skip the recognition step: Is the wave made of electric and magnetic fields, such as light or radio, so that it can cross a vacuum? That leads to a correct-looking substitution attached to the wrong physical model.

34

Thinking electromagnetic waves need a medium to travel — unlike sound, EM waves propagate through empty space; that is how sunlight reaches Earth.

35

Assuming different types of EM radiation are fundamentally different — radio waves, light, and X-rays are all the same phenomenon at different frequencies.

36

Confusing the speed of EM waves in vacuum with their speed in a medium — EM waves slow down in glass, water, and other materials.

37

Students often know a formula related to electromagnetic spectrum but skip the recognition step: Are bands of electromagnetic radiation being ordered, compared or identified by frequency or wavelength? That leads to a correct-looking substitution attached to the wrong physical model.

38

Thinking that different parts of the EM spectrum are fundamentally different types of waves — they are all electromagnetic waves, differing only in frequency and wavelength.

39

Reversing the relationship between frequency and wavelength — higher frequency means shorter wavelength, not longer.

40

Believing that only gamma rays and X-rays are dangerous — ultraviolet and even intense visible light can cause harm at sufficient intensity.

41
Reflection
Stuck Point

Students often know a formula related to reflection but skip the recognition step: Does the wave bounce back into the medium it came from? That leads to a correct-looking substitution attached to the wrong physical model.

42
Reflection
Mistake

Measuring angles from the surface instead of from the normal — the law of reflection uses angles measured from the perpendicular to the surface.

43
Reflection
Mistake

Thinking that only mirrors reflect light — all surfaces reflect light; mirrors just do it in an orderly (specular) way, while rough surfaces scatter it (diffuse reflection).

44
Reflection
Mistake

Forgetting that reflection does not change the speed or wavelength of a wave — only the direction changes.

45
Refraction
Stuck Point

Students often know a formula related to refraction but skip the recognition step: Does the wave cross into a new material where its speed changes? That leads to a correct-looking substitution attached to the wrong physical model.

46
Refraction
Mistake

Confusing the direction of bending — light bends toward the normal when entering a denser medium (higher n), not away from it.

47
Refraction
Mistake

Forgetting that the wave speed changes but the frequency stays the same — it is the wavelength that changes when a wave enters a new medium.

48
Refraction
Mistake

Applying Snell's law with angles measured from the surface instead of from the normal — all angles must be measured from the perpendicular.

49
Diffraction
Stuck Point

Students often know a formula related to diffraction but skip the recognition step: Does the wave spread out after passing through a gap or around an edge, with no change of material? That leads to a correct-looking substitution attached to the wrong physical model.

50
Diffraction
Mistake

Thinking diffraction only happens with light — all waves (sound, water, radio) diffract; it is a universal wave property.

51
Diffraction
Mistake

Confusing diffraction with refraction — diffraction is spreading through a gap or around an edge, while refraction is bending due to a change in medium and wave speed.

52
Diffraction
Mistake

Assuming a narrower slit produces a narrower diffraction pattern — the opposite is true; a narrower slit causes more spreading.

53
Interference
Stuck Point

Students often know a formula related to interference but skip the recognition step: Do two or more waves overlap at the same place, so their displacements add or cancel? That leads to a correct-looking substitution attached to the wrong physical model.

54
Interference
Mistake

Thinking that destructive interference violates energy conservation — the energy is not lost but redistributed to regions of constructive interference.

55
Interference
Mistake

Confusing interference with diffraction — interference involves the superposition of distinct waves, while diffraction is the spreading of a single wave through a gap.

56
Interference
Mistake

Forgetting that waves pass through each other unchanged after interfering — the combined pattern is only temporary at the overlap region.

57
Doppler Effect
Stuck Point

Students often know a formula related to doppler effect but skip the recognition step: Is the source or the listener moving, so the frequency received differs from the frequency sent out? That leads to a correct-looking substitution attached to the wrong physical model.

58

Confusing the actual emitted frequency with the observed frequency — the source emits at the same frequency regardless of motion; only the observer hears a different frequency.

59

Getting the sign convention wrong in the Doppler formula — approach should increase the observed frequency, recession should decrease it.

60

Applying the simple sound Doppler formula to light — for electromagnetic waves at high speeds, the relativistic Doppler formula must be used instead.

61
Period
Stuck Point

Students often know a formula related to period but skip the recognition step: Is the unknown the number of seconds one full cycle takes, there and back? That leads to a correct-looking substitution attached to the wrong physical model.

62
Period
Mistake

Confusing period with frequency — period is seconds per cycle, frequency is cycles per second; they are reciprocals, not interchangeable.

63
Period
Mistake

Measuring less than one full cycle — the period must cover one complete oscillation from start back to the same position and direction.

64
Period
Mistake

Forgetting to convert time units: using milliseconds directly in T=1/f without converting to seconds first.

65
Intensity
Stuck Point

Students often know a formula related to intensity but skip the recognition step: Is the question how much wave power lands on each square metre at a particular place? That leads to a correct-looking substitution attached to the wrong physical model.

66
Intensity
Mistake

Confusing intensity with total power.

67
Intensity
Mistake

Ignoring the area over which the wave spreads.

68
Intensity
Mistake

Thinking doubling the distance from a point source halves the intensity — the power spreads over a sphere of area 4πr2, so intensity falls as 1/r2: twice as far gives one quarter, three times as far gives one ninth.

69
Speed of Sound
Stuck Point

Students often know a formula related to speed of sound but skip the recognition step: Do you need how fast sound travels in a particular material or at a particular temperature? That leads to a correct-looking substitution attached to the wrong physical model.

70

Assuming all sound travels at 343 m/s regardless of medium or temperature.

71

Confusing wave speed with the speed of particles oscillating in the medium.

72

Thinking sound travels fastest in air because air is light and easy to push — sound is slowest in gases and faster in liquids and solids: about 343 m/s in air, about 1480 m/s in water and roughly 5000 to 6000 m/s in steel.

73
Pressure Wave
Stuck Point

Students often know a formula related to pressure wave but skip the recognition step: Is the wave described by how the pressure at a point rises above and falls below its normal value? That leads to a correct-looking substitution attached to the wrong physical model.

74

Drawing pressure waves as if they had transverse crests and troughs.

75

Thinking pressure waves can travel through vacuum.

76

Thinking the air molecules ride along with the sound from the source to your ear — each molecule only moves back and forth about its own spot; what crosses the room is the pattern of compressions and rarefactions and the energy it carries.

77
Pitch
Stuck Point

Students often know a formula related to pitch but skip the recognition step: Is the question about how high or low a sound seems, like the position of a note on a scale? That leads to a correct-looking substitution attached to the wrong physical model.

78
Pitch
Mistake

Using amplitude to explain pitch differences.

79
Pitch
Mistake

Assuming a louder sound must also have a higher pitch.

80
Pitch
Mistake

Thinking a bigger or longer vibrating object makes a higher note — larger, longer, looser or heavier objects vibrate more slowly, so they sound lower: a tuba plays lower than a trumpet, and shortening a guitar string raises its note.

81
Loudness
Stuck Point

Students often know a formula related to loudness but skip the recognition step: Is the question how strong or faint a sound seems to a listener, rather than how high it is? That leads to a correct-looking substitution attached to the wrong physical model.

82
Loudness
Mistake

Confusing loudness with pitch.

83
Loudness
Mistake

Thinking a larger frequency automatically means a louder sound.

84
Loudness
Mistake

Thinking twice the amplitude sounds twice as loud — doubling the amplitude makes the intensity four times larger, which raises the sound level by only about 6 dB, while a sound must rise roughly 10 dB to seem twice as loud.

85
Standing Waves
Stuck Point

Students often know a formula related to standing waves but skip the recognition step: Does the pattern stay in one place, with fixed points that never move, instead of travelling along? That leads to a correct-looking substitution attached to the wrong physical model.

86

Thinking standing waves are a different kind of wave instead of an interference pattern.

87

Confusing nodes with antinodes.

88

Thinking a standing-wave pattern travels along the string like an ordinary wave — the nodes and antinodes stay at fixed places and each bit of the string only oscillates in place, which is why the wave is called standing.

89
Harmonics
Stuck Point

Students often know a formula related to harmonics but skip the recognition step: Are you finding the set of frequencies a string or pipe of a given length can sustain? That leads to a correct-looking substitution attached to the wrong physical model.

90
Harmonics
Mistake

Assuming every pipe or string has identical harmonic rules.

91
Harmonics
Mistake

Confusing the first harmonic with the first overtone.

92
Harmonics
Mistake

Thinking harmonics are random extra frequencies mixed in with the main note — for a string or open pipe they are exact whole-number multiples of the fundamental: a string with a 110 Hz fundamental can also vibrate at 220, 330 and 440 Hz.

93
Resonance
Stuck Point

Students often know a formula related to resonance but skip the recognition step: Is something being pushed or shaken at a rhythm that matches its own natural frequency? That leads to a correct-looking substitution attached to the wrong physical model.

94
Resonance
Mistake

Thinking any repeated force creates resonance.

95
Resonance
Mistake

Ignoring damping, which limits how large the amplitude becomes.

96
Resonance
Mistake

Thinking a harder push is what produces resonance — what matters is matching the natural frequency: a gentle push timed to a swing's natural rhythm builds a bigger motion than a hard push at the wrong rhythm.