Matter and Mixtures: Homogeneous vs Heterogeneous Examples and Physical vs Chemical Properties

Matter is anything that has mass and takes up space: a rock, water and the air in a balloon are matter, while light, heat and sound are not. A heterogeneous mixture has parts that differ from spot to spot, like salad, granite or oil and water, while a homogeneous mixture such as salt water, air or brass looks the same throughout. Colour and melting point are physical properties; flammability and the ability to rust are chemical properties.

What Is Matter in Chemistry?

In chemistry, matter is anything that has mass and takes up space (has volume). It exists as solids, liquids, gases and plasma, the four states of matter, and according to the particle theory all of it is built from tiny particles that are always moving. To decide whether something is matter, ask two questions: does it have mass, and does it fill space? If both answers are yes, it is matter, even when you cannot see it.

Examples of Matter

  • Solids: a rock, a pencil, an ice cube, table salt
  • Liquids: water, milk, orange juice, cooking oil
  • Gases: air, the helium in a balloon, steam
  • Plasma: lightning, the glowing gas in a neon sign, the Sun
  • Living things: your body, a tree, a slice of bread

Not Matter

  • Light from the Sun or a lamp
  • Heat
  • Sound
  • Radio waves and microwaves
  • Shadows
  • Ideas, feelings and time

Light, heat and sound are forms of energy. They have no mass of their own and do not take up space, so they are not matter. A candle flame is a useful borderline case: the hot gases and glowing specks of soot in it are matter, while the light and heat it gives off are energy.

Definitions at a Glance

These are the terms used to sort matter into groups. Each one links to a full lesson.

TermDefinitionExample
MatterAnything that has mass and takes up spaceA rock, water, air
Pure substanceMatter with one fixed composition: a single element or a single compoundGold, distilled water, table salt
ElementA pure substance made of one kind of atom; no chemical reaction can break it into simpler substancesCopper (Cu), oxygen gas (O₂), helium (He)
CompoundTwo or more elements chemically bonded in a fixed ratioWater (H₂O), table salt (NaCl), carbon dioxide (CO₂)
MixtureTwo or more substances combined without chemical bonding, in amounts that can varySalt water, trail mix, air
Homogeneous mixtureA mixture with the same composition everywhere; its parts cannot be seen, even under a microscopeSalt water, air, brass
Heterogeneous mixtureA mixture whose composition differs from one part to anotherSalad, granite, oil and water
Mechanical mixtureA heterogeneous mixture whose separate parts you can see (a common term in Canadian courses)Trail mix, pizza, sand and gravel
SolutionAnother name for a homogeneous mixture: a solute dissolved evenly in a solventSugar water, vinegar, soda in a sealed bottle
SoluteThe substance that gets dissolved, usually the smaller amountSalt in salt water
SolventThe substance that does the dissolving, usually the larger amountWater in salt water
Physical propertyA trait you can observe or measure without changing what the substance isColour, density, melting point
Chemical propertyA substance's ability to change into new substancesFlammability, rusting, reacting with acid

Pure Substances vs Mixtures

Every sample of matter is either a pure substance or a mixture. A pure substance contains only one kind of particle, so its composition never changes: water is always H₂O, two hydrogen atoms for every oxygen atom, wherever it comes from. A mixture holds two or more substances side by side without bonding them, so the recipe can change and each part keeps its own properties.

How Matter Is Classified

  • Pure substances (one fixed composition)
    • Elements: gold (Au), copper (Cu), oxygen gas (O₂)
    • Compounds: water (H₂O), table salt (NaCl), table sugar (C₁₂H₂₂O₁₁)
  • Mixtures (two or more substances, not bonded)
    • Homogeneous mixtures, also called solutions: salt water, air, brass
    • Heterogeneous mixtures: muddy water, milk, blood
      • Mechanical mixtures, whose parts you can see: trail mix, salad, granite
FeaturePure substanceMixture
What it containsOne element or one compoundTwo or more substances
CompositionFixed: water is always two hydrogen atoms to one oxygen atomVariable: salt water can be made more or less salty
Melting and boilingSharp, fixed temperatures; pure water boils at 100 °C at sea levelUsually over a range; salt water starts boiling above 100 °C, and the temperature creeps up as the water boils away
How to separate itAn element cannot be broken down chemically; a compound needs a chemical reactionPhysical methods: picking out, filtering, evaporating, distilling, a magnet
ExamplesGold, oxygen, distilled water, table salt, sugarSalt water, air, soil, salad, brass

Homogeneous vs Heterogeneous Mixtures

The difference is whether the mixture is uniform. In a homogeneous mixture the substances are blended down to single atoms, ions or molecules, so every sample has exactly the same make-up. In a heterogeneous mixture the substances stay in separate regions, so one spoonful can contain more of one part than the next. A quick test: if two samples taken from different spots could hold different amounts of each ingredient, the mixture is heterogeneous.

QuestionHomogeneousHeterogeneous
Same composition in every sample?YesNo
Can you see separate parts?No, not even under a microscopeYes, by eye or under a microscope
Does it settle when left standing?NeverOften (sand in water, mud); fine mixtures such as homogenized milk stay mixed for a long time
Does a flashlight beam show up inside it?No; the beam passes through unseenIn fine mixtures such as diluted milk or fog, yes: the particles scatter the light (the Tyndall effect)
ExamplesSalt water, clean air, vinegar, brassSalad, granite, oil and water, milk

Examples of Heterogeneous Mixtures

These everyday mixtures are all heterogeneous. In each one, samples taken from different spots contain different amounts of each part.

MixtureWhat is in itHow you can tell
SaladLettuce, tomato, cucumber, dressingEach forkful has a different mix of pieces
Trail mixNuts, raisins, seeds, chocolateYou can pick out each kind of piece by hand
GraniteGrains of quartz, feldspar and micaGrains of different colours are visible in the stone
Oil and waterCooking oil, waterTwo separate layers form; the oil floats because it is less dense
Sand and waterSand, waterThe sand sinks and collects on the bottom
ConcreteCement, sand, gravelPebbles show on any broken edge
SoilMineral grains, clay, decaying plant matter, water, airScoops from different spots look and feel different
Chocolate chip cookieDough, chocolate chipsSome bites have more chips than others
Vegetable soupBroth, carrots, peas, noodlesOne ladle scoops more vegetables than another
Muddy waterFine soil particles, waterCloudy at first; the mud slowly settles into a layer

Heterogeneous Mixtures That Look Uniform

Some heterogeneous mixtures look smooth to the eye because their parts are tiny. Blood is evenly red, yet a centrifuge separates it into clear yellowish plasma and a layer of red cells. Fog is droplets of liquid water hanging in air. Mayonnaise is droplets of oil spread through a watery base.

Milk is the case most often argued about. Some beginner worksheets call it homogeneous because it looks the same everywhere. Under a microscope, though, milk holds droplets of fat and clusters of protein that are far larger than dissolved molecules, and they scatter light. Chemists therefore class milk as a colloid, a kind of heterogeneous mixture. Homogenized milk is still a colloid; homogenizing only makes the fat droplets smaller so the cream does not rise to the top.

For practice classifying more mixtures, see the heterogeneous mixture examples and practice problems.

What Is a Mechanical Mixture?

A mechanical mixture is a mixture in which you can see the different parts, and each part keeps its own colour, shape and taste. The term is used in many Canadian science courses for the most obvious kind of heterogeneous mixture. Trail mix, a salad, a pizza, granite, sand mixed with gravel, and cereal in a bowl of milk are all mechanical mixtures. Because nothing new forms when the parts are combined, you can usually take them apart again by hand, with a sieve or with a magnet.

Textbooks do not all draw the line in the same place. Some treat mechanical mixture as another name for heterogeneous mixture; under that convention milk counts as a mechanical mixture (an emulsion), and some of the practice questions on this site use it. Others split mixtures four ways, as in the table below, and reserve mechanical mixture for mixtures whose pieces you can pick out by eye; under that scheme, milk is a colloid rather than a mechanical mixture. Follow the version your course uses; the chemistry underneath is the same.

TypeWhat you seeExamples
Mechanical mixture (heterogeneous)Distinct pieces you can see and pick apartTrail mix, salad, granite, sand and gravel
Suspension (heterogeneous)Cloudy; the particles settle on standing and can be filtered outMuddy water, orange juice with pulp
Colloid (heterogeneous)Looks uniform; the particles are too small to settle out or be caught by filter paperMilk, fog, whipped cream, gelatin dessert
Solution (homogeneous)Uniform at every scale; a liquid solution is see-through, though it may be coloured, and nothing ever settlesSalt water, vinegar, brewed tea

See worked mechanical mixture examples for more practice telling these groups apart.

Examples of Homogeneous Mixtures

Every homogeneous mixture is a solution, and solutions come in all three common states. In each example below, one substance (the solvent) holds the others (the solutes) evenly spread through it.

MixtureSolute(s)SolventState
Salt waterTable salt (NaCl)WaterLiquid
Sugar waterTable sugar (sucrose)WaterLiquid
VinegarAcetic acid (about 5 percent)WaterLiquid
Brewed tea, leaves removedCaffeine and the colour and flavour compounds from the leavesWaterLiquid
Soda in a sealed bottleCarbon dioxide (CO₂), sugar, flavouringsWaterLiquid
Clean, dry airOxygen (about 21 percent), argon, carbon dioxideNitrogen (about 78 percent)Gas
BrassZincCopperSolid

Two of these stay homogeneous only under the right conditions. Air counts as homogeneous when it is clean; dust, smoke or fog droplets make it heterogeneous. Soda is a solution while the bottle is sealed, but once you open it, bubbles of carbon dioxide gas form and the drink briefly holds separate gas and liquid regions.

More practice: homogeneous mixture examples and practice problems.

What Is a Solution? Solute and Solvent Explained

A solution is a homogeneous mixture in which one substance, the solute, is dissolved evenly in another, the solvent. The solvent is usually the substance present in the larger amount, and it sets the state of the solution: salt water behaves like a liquid, brass like a solid metal and air like a gas. A solute can be a solid (salt in water), a liquid (acetic acid in vinegar) or a gas (carbon dioxide in soda).

Dissolving does not destroy the solute. Its particles spread out between the solvent particles, too small to see, but they are still there: leave a dish of salt water on a sunny windowsill and salt crystals appear as the water evaporates. A solution never settles and passes through filter paper unchanged, which is why filtering cannot take the salt out of seawater.

Water dissolves so many substances that it is often called the universal solvent, but it does not dissolve everything. Oil and wax stay separate from water, while nail polish remover (acetone) dissolves nail polish that water cannot touch. The most solute that can dissolve in a given amount of solvent at a given temperature is its solubility.

How to Separate Mixtures

Because the parts of a mixture are not bonded, physical methods can pull them apart, and every part comes out with its original properties. Each separation method relies on one physical property that the parts do not share.

MethodProperty it usesWhat it separatesExample
Picking out or sievingSize and appearancePieces large enough to seeSorting trail mix; sieving gravel out of sand
MagnetMagnetismIron, nickel or cobalt from non-magnetic materialsPulling iron filings out of sand
FiltrationParticle sizeAn undissolved solid from a liquidSand from water; coffee grounds from coffee
DecantingDensityA liquid poured carefully off a settled solid or off a denser liquidPouring water off sand that has sunk to the bottom
EvaporationOne part evaporates and the other does notA dissolved solid from its solvent (the solvent is lost to the air)Salt left behind when salt water dries
DistillationBoiling pointA solvent recovered from a solution, or two liquids with different boiling pointsFresh water from seawater; ethanol (boils at 78 °C) from water
ChromatographyHow strongly each substance clings to the paper rather than travelling with the solventDissolved dyesThe separate colours in black marker ink

Separating Sand, Salt and Iron Filings

  1. Drag a magnet through the dry mixture to remove the iron filings.
  2. Add water and stir. The salt dissolves; the sand does not.
  3. Filter. The sand stays on the filter paper, and salt water passes through.
  4. Evaporate the water from the salt water to recover the salt.

The order matters. Filtering the dry mixture first does nothing useful, and filtering salt water never removes the salt, because a dissolved solute passes straight through the paper.

Want to check your understanding?

Our interaction checks test whether you truly understand a concept — not just whether you can repeat a procedure.

Try an interaction check

Physical vs Chemical Properties

A physical property can be observed or measured without changing what the substance is. A chemical property describes how a substance can change into new substances, and you only see it by letting that change happen. One question settles most cases: after the test, do you still have the same substance? If yes, the property is physical. If the test made something new, such as ash, rust or a gas, the property is chemical.

Physical Property Examples

PropertyWhat it describesExample
ColourHow the substance looksCopper is reddish-brown; sulfur is yellow
DensityMass per unit of volumeWater is about 1 g/cm³ and gold about 19.3 g/cm³, so gold sinks
Melting pointTemperature at which a solid turns liquidIce melts at 0 °C
Boiling pointTemperature at which a liquid boilsWater boils at 100 °C at sea level
SolubilityHow much of it dissolves in a solventSugar dissolves in water; sand does not
HardnessHow well it resists scratchingDiamond scratches glass
Electrical conductivityWhether it carries an electric currentCopper wire conducts; rubber does not
MagnetismWhether a magnet attracts itIron is attracted; aluminum is not
State at room temperatureSolid, liquid or gasMercury is a liquid metal

Chemical Property Examples

PropertyWhat it describesExample
FlammabilityAbility to burnPaper burns in air, leaving ash, carbon dioxide and water vapour
Reactivity with acidWhether it reacts when an acid is addedBaking soda fizzes in vinegar, releasing CO₂; zinc releases hydrogen gas in hydrochloric acid
Ability to rustIron reacting with oxygen and waterA bike chain left in the rain forms reddish-brown rust (iron oxide)
Ability to tarnishA metal surface reacting with substances in the airSilver turns black as a layer of silver sulfide forms
Reactivity with waterWhether it reacts when placed in waterSodium reacts violently, giving off hydrogen gas; gold does not react at all
ToxicityAbility to harm living things through reactions in the bodyCarbon monoxide binds to the hemoglobin in blood and blocks it from carrying oxygen
Tendency to decomposeWhether it breaks down on its own or when heatedHydrogen peroxide (H₂O₂) slowly breaks down into water and oxygen gas

Physical vs Chemical Change: How It Links to Properties

A property describes what a substance is like or what it can do; a change is what actually happens to a sample. Measuring a physical property sometimes causes a physical change: to find the melting point of ice you have to melt it, but the liquid is still H₂O, and freezing it gives back ice. That kind of phase change alters the state, not the substance. Observing a chemical property always needs a chemical change: you learn that wood is flammable only by burning some, and the ash and gases left behind are new substances.

Dissolving, melting, boiling, freezing, cutting and crushing are physical changes. Burning, rusting, cooking an egg and baking soda fizzing in vinegar are chemical changes. Signs of a chemical change include a gas forming when nothing is boiling, a new solid appearing in a liquid, a lasting colour change, and light or heat being given off. No single sign is proof on its own: boiling water also makes bubbles.

Worked Examples

Example 1: Classify Granite

Answer: A heterogeneous mixture, and in Canadian terms a mechanical mixture.

Why: Granite shows separate grains of pink or white feldspar, glassy grey quartz and flakes of black or silvery mica. A chip from one spot can hold a different share of each mineral than a chip from another spot, and each mineral keeps its own colour and hardness.

Example 2: Salt Water or Distilled Water?

Salt water: A homogeneous mixture (a solution). It contains two substances, NaCl and H₂O, the amount of salt can vary, and evaporating the water leaves salt crystals behind. It starts to boil slightly above 100 °C.

Distilled water: A pure substance, specifically the compound H₂O. It boils at 100 °C at sea level from the first bubble to the last drop and evaporates without leaving anything behind.

Lesson: The two look identical in a glass, so appearance alone cannot tell a pure substance from a solution. A property test can.

Example 3: Is Milk Homogeneous or Heterogeneous?

Answer: Heterogeneous. Milk is a colloid.

Why: Milk looks uniform, but a microscope shows fat droplets and protein clusters spread through water. Those particles are too small to settle out quickly but large enough to scatter light, which a true solution never does. If your class defines homogeneous as "looks the same by eye," you may see milk listed as homogeneous; at the particle level it is not.

Example 4: Physical or Chemical Property?

Copper is reddish-brown and conducts electricity: Physical. Looking at it and running a current through it leave it copper.

A copper roof slowly turns green outdoors: Chemical. The copper reacts with oxygen, water, carbon dioxide and other substances in the air to form a green coating of new copper compounds.

Sugar dissolves in water: Physical. Evaporate the water and the sugar is back.

Sugar turns black when heated strongly: Chemical. The sugar breaks down into black carbon and water vapour, and cooling it does not turn it back into sugar.

Common Mistakes

Calling light or heat matter, or saying air is not matter

Light, heat and sound are energy: they have no mass and take up no space. Air is matter even though it is invisible. A balloon grows as you fill it, and a pumped-up ball has more mass than a flat one.

Reading "pure" the everyday way

"100 percent pure orange juice" and "pure honey" are both mixtures of water, sugars and many other compounds. In chemistry, pure means one substance only, such as distilled water or a bar of copper.

Assuming anything that looks uniform is a pure substance

Salt water looks exactly like plain water, yet it is a mixture of two substances. Milk looks uniform, yet it is a heterogeneous colloid. Classify by what the sample contains, and use a property test, such as boiling point or what is left after evaporation, when your eyes cannot decide.

Calling a property chemical because heat is involved or something seems to vanish

Melting point, boiling point and solubility are physical properties, even though finding them means heating or dissolving the sample. Sugar stirred into tea has not reacted; it can be recovered. The test is whether a new substance forms, not whether the sample looks different.

Next Steps: Explore Each Concept

Each page below has a full definition, an intuitive explanation, common mistakes and practice questions for one idea from this guide.

Read Next

Frequently Asked Questions

What is matter in chemistry? Give examples.

Matter is anything that has mass and takes up space. Rocks, water, air, a pencil and your own body are all matter, whether solid, liquid or gas. Light, heat, sound and shadows are not matter, because they have no mass and fill no space.

What are 5 examples of heterogeneous mixtures?

Salad, trail mix, granite, oil and water, and concrete are five common heterogeneous mixtures. In each one the composition changes from place to place, so two samples can contain different amounts of each part. Sand in water, soil, vegetable soup and chocolate chip cookies are further examples.

What are examples of homogeneous mixtures?

Salt water, sugar water, vinegar, clean air and brass are homogeneous mixtures. Each has the same composition throughout, and its parts cannot be seen even under a microscope. Homogeneous mixtures are also called solutions, and they can be liquids, gases or solids.

What is a mechanical mixture?

A mechanical mixture is a mixture whose different parts you can see and pick apart, such as trail mix, a salad, a pizza or granite. The term is common in Canadian science courses, where it names one kind of heterogeneous mixture. Each part keeps its own properties, and no new substance forms when the parts are combined.

Is milk a homogeneous or heterogeneous mixture?

Milk looks uniform, but under a microscope it contains droplets of fat and clusters of protein spread through water, so chemists classify it as a heterogeneous mixture called a colloid. It is not a solution, because its particles are large enough to scatter light. Some beginner worksheets call milk homogeneous because it looks the same by eye, so check which definition your class uses.

What is the difference between physical and chemical properties?

A physical property can be observed or measured without changing what the substance is, such as colour, density, melting point or solubility. A chemical property describes how a substance can change into new substances, such as flammability, reactivity with acid or the ability to rust. You can only observe a chemical property by letting the reaction happen.

Is solubility a physical or chemical property?

Solubility is a physical property. When sugar or salt dissolves in water it is still sugar or salt, and evaporating the water brings it back unchanged. Reactivity with water is different: sodium reacts with water to release hydrogen gas, which is a chemical property because new substances form.

Related Guides

About Sense of Study

Sense of Study is a concept-first learning platform that helps students build deep understanding in math, physics, chemistry, statistics, and computational thinking. Our approach maps prerequisite relationships between concepts so students master foundations before moving forward — eliminating the gaps that cause confusion later.

With 800+ interconnected concepts and mastery tracking, we help students and parents see exactly where understanding breaks down and how to fix it.